Linear Power Amplifier BAA 60 BEAK
The power amplifier BAA 60 BEAK was developed for the control of vibration test systems with a maximum of 60 VA. The RMS output power is calculated at a load impedance of 4 Ohm. The frequency of the power amplifier ranges from 40 Hz to 10 kHz at full power or with 0,1 Hz to 100 kHz with reduced power and minimum harmonic distortion. The device offers extremely stable operation within the specified temperature and voltage range and is therefore highly reliable. Its RMS output current limit is variable.
Technical specifications:
| Continuous Sine Output Power | 60 VA |
| Frequency Range | 0,1 Hz – 100 kHz (-20dB) |
| Frequency Range at full Power | 40 Hz – 20 kHz |
| Optimum Impedance | 4 Ohm |
| Current Mode | No |
| Voltage Mode | Yes |
| Phase Shift | Yes |
| Max. Voltage (RMS) | 15,6 V |
| Max. Current (RMS) | 3,9 A |
| Max. Current (DC) | 1,0 A |
| Input Voltage | < 5 V |
| Nonlinear Harmonic Distortion Factor | < 0,1 % |
| Noise and Hum | > 95 dB |
| Dimensions W x H x D (mm) | 482 x 88 x 450 |
| Weight (kg) | 12 kg |
| Protection Circuits | Current Limiting Temperature Control Clipping |
Would you like an individual product consultation? We’re happy to advise!